4. Hazardous conditions  
For workers tackling major projects outdoors, the day-to-day change of weather conditions can have a large affect on eye safety. For example, a particularly windy day at a construction site can send excess grit into the air, potentially leading to a higher risk of eye injuries than normal. Make sure to always have emergency safety supplies on hand, especially when conditions are unpredictable. In the case of wind blowing particles airborne, the American Optometrist Association recommends having eye wash available to help irrigate the eye and remove any debris. 

5. Wearing the wrong protection  
To make workplace eye safety a main priority, you have to be wearing the appropriate glasses, goggles or face-mask for the job. If you're wearing the wrong type of protection, you're more likely to get injured - plain and simple. Deciding on the appropriate eyewear for a specific work environment should be part of the hazard assessment that is done before a job commences. Make a point of ensuring that all eyewear is undamaged, clean and in good condition, and also update procedural practices as needed. If conditions on the job change, reevaluate the potential hazards and switch out your eyewear accordingly.

MFASCO Health & Safety Supporting Workplace Injury Prevention

Workplace Injuries Prevention Products & Accessories:
Safety Glasses
Eye Care Supplies
PPE Masks & Clothing
Workplace Safety Equipment

Additional Resources for Preventing Workplace Injuries:
How do Safety Glasses Protect Your Eyes
5 Tips for Workplace Safety
How to Select the Right PPE Gear
Vocational School Safety Eyewear
How to Sanitize a Work Surface

Hearing and sight are two of the most valuable and important things to protect in the workplace. However, while precautions can easily be taken to prevent eye injuries, the U.S. Centers for Disease Control and Prevention note that about 2,000 eye-related injuries happen to workers each day. These injuries not only cause workers to miss days on the job, but also can be severe enough to cause permanent damage. This is both dangerous for  employees and can be counterproductive and costly for businesses. It's in everyone's best interests to make eye safety a priority in the workplace - here are five tips to get you started:

1. Wear the proper protection
The American Optometric Association highlights the importance of always wearing eye protection that is appropriate for your work conditions. For example, safety glasses may be best for work conditions in which dust or flying particles are a frequent hazard, such as in most industrial fabricating environments. Variations of the glasses come with protective side-shields that provide a more comprehensive shield against debris. Goggles, on the other hand, are necessary in environments where chemicals or diseases are present. Goggles provide a tight shield over the eyes to ensure that liquids such as chemical splashes don't make contact with the eyes or direct area around them. In some cases, face shields or other larger protective measures may be needed. 

2. Eliminate hazards  
A workplace culture that makes safety a priority will organically encourage workers to reduce and avoid hazards. Installing safety measures such as transparent shields around tools or in other areas where workers are at risk will ensure that they're not relying on protective eyewear alone. Also, make a point of educating and training workers on the dangers that are specific to your workplace. Develop protocols that encourage general safety, especially in regard to when and where employees should wear protective gear such as eyewear or hearing protection. 

3. Keep lenses clean  
If workers can't see, their eyes might not be the only thing at risk. Honeywell notes that eyewear must provide a clear view of the work area to be truly effective. The source notes that in workplaces where lots of dust and grit is constantly in the air, anti-scratch eyewear is imperative. Again, this means that you should research the appropriate eyewear for your line of work. For example, if you and your colleagues are working outdoors on a regular basis, finding eyewear that also has sun protection. 

4. Have first aid readily available  
While you can take a lot of steps in the workplace to prevent eye injuries, there's no excuse for being ill-prepared when one is sustained. Make sure to have a comprehensive first aid kit on hand to address any work-related injuries, but in particular have eye wash and eye drops readily available. For minor irritation caused by dust or grit, eye wash rinse will likely do the trick. However, for more serious eye injuries where a basic eye wash rinse isn't enough or if there was exposure to acids or chemicals, the use of an emergency eyewash station will be necessary.

5. Replace damaged goods  
As eyewear should be used on a regular basis in certain workplaces, odds are eventually safety glasses or goggles will get cracked, scratched or broken. In such situations, protective eyewear may reduce visibility or not provide comprehensive protection. To keep your eyewear in good condition, clean your equipment regularly, hang it up after use and make sure not to leave eyewear in places where it can easily get broken.

Eye protection should not be taken lightly, especially when working environments pose risks to your employees occupational safety. MFASCO has a number of resources available to restock your eye protection supplies, and ensure that your safety glasses & face fields are properly maintained, functional, and sanitized.

Workplace Eye Protection Products & Accessories:

• Safety Glasses
• Face Protection & Safety Glasses Cleaning Supplies
• Accessories for Safety Glasses & Face Protection

Additional Resources for Workplace Eye Protection:

• How do Safety Glasses Protect Your Eyes
• 5 Tips for Workplace Safety
• How to Select the Right PPE Gear
• Vocational School Safety Eyewear

In some cases, to get a truly immersive experience in science or manufacturing, students might work with materials or tools that pose certain risks. While steps are taken to protect students' body parts that actually come in contact with the material, eye safety can go overlooked. Here are some eye safety guidelines to keep in mind while working in chemistry and shop class:

Chemistry class eye safety
Chemistry class experiments may involve potentially dangerous materials, such as alkalis and acids.

Provide equipment - Safety goggles need to be provided for each student. The American Chemical Society states safety glasses do not provide enough protection from possible chemical spills. Goggles must be worn throughout the duration of the laboratory experiences, from the very initial stages of set up until all the equipment is cleaned and put away.

Maintain your protective goggles. Make sure there are no cracks or damage to the surface. Make sure the goggles are clean. Students should be able to see clearly to prevent errors. In the event of a mistake, a chemical eyewash station or eyewash solution should be available.

Prepare treatment - If a chemical does come in contact with a student's eyes, be aware of the treatment practice for each substance. Most chemicals should be rinsed out immediately, so you need to make use of your eye wash station or solution. In the case of severe burns, contact emergency professionals.

Shop class eye safety Shop class safety should be handled with the same amount of care as chemistry classes, but working with high-powered tools can present its own set of unique challenges.

Identify hazards - The CDC warns small particles such as metal slivers and wood chips are the primary cause of eye injury when working a construction project. Be aware of what tools throw off the most debris and what areas are in the possible hazard zone. Emphasize safety the moment students step into a work area.

Safety glasses protect students from small debris.

Provide equipment - Eye protection should be worn by everyone in every part of the work area. Safety glasses should provide adequate protection from particle projectiles. Normal glasses and contacts will not be enough. Make sure all safety glasses are in good shape and offer clear vision.

In the event of working with larger tools that might generate heat or other further dangers, you need to provide face shields or similar protection.

Prepare treatment - If debris gets in a student's eye, you should contact health officials. In some cases, you can try gently cleaning out the eye with water or eyewash solution. If this does not work, you should just protect the affected eye with bandages and wait for professional help. It is unwise for teachers or students to remove debris themselves and risk further injury to the eye.

These two classes offer the most potential safety concerns, but eye safety should be considered in any educational experience that involves unique materials and direct student involvement.

How to get rid of spring allergies

Plan ahead for allergy season

Talk with your doctor

Don’t settle for the same old strategy

Limit Your Exposure

Treating injuries & Kit Fill List

Examples of Injuries and what first aid supplies to use

Trauma Injuries

Minor Injuries

Accidents happen in the workplace every day.  Having a first aid kit that is stocked and ready to use.  Most of us will have an old first aid kit that has not been restocked in ages so today we are providing 3 examples of a first aid reorder list.  Regardless of the box or container you are using, these first aid reorder checklists will help you update and restock your kit in no time.

The ANSI requirement offers a great starting point for any first aid kit. The ANSI Z308.1=2009 minimum required items are: 

• (1) First Aid Guide 
• (1) Absorbent Compress 4" X 8" minimum 
• (16) 1 X 3 Adhesive Bandages 
• (1) Adhesive Tape 2.5 yard roll 
• (10) Antiseptic Treatment Applications 0.9 Gram each 
• (6) Burn Treatment Applications 0.9 Gram each 
• (4) 3" X 3" Sterile Gauze Pads 
• (2) Pair Medical Exam Gloves 
• (1) Triangular Bandage 4" X 40" X 56" min 
• (6) Antibiotic Ointment Applications 0.5 Gram each. 

ANSI also recommends supplies like these: 

•  Analgesic (oral, non-drowsy formula) 
•  Bandage Compress, 2" X 2" min. 
•  Breathing Barrier
• Single use Burn Dressing 12 square inches 
• Cold Pack 4 X 5 min. 
•  Eye Covering 1/4 thick min. 
•  Eye/Face Wash Sterile 4 oz. min. 
•  Roller Bandage 2 X 4 yards min. 
•  Hand Sanitizer

• Eye Wash 4 Oz
• Eye Wash Single Use 1/2 Oz
• Cpr Face Shield Value
• Cold Pack Unit Large
• Splinter Out 20'S
• Burn Dressing 2 X 6
• First Aid Cream 25
• Antiseptic Pump Spray 2 Oz
• Burn Pump Spray 2Oz
• Cohesive Bandage Tan 1"
• Cohesive Bandage 2'' Tan
• Adhesive Tape Triple Cut
• Blood Stopping Bandage
• Triple Antibiotic Ointment 25
• Forcep Splinter 3 1/2
• Scissor Kit Size
• Eye Pads Oval Each
• Gauze Pads 3 X 3 25/Bx
• Triangular Bandage 40'' Ns
• Bandaid 7/8 X 3 50
• Fingertip Bandaid 40
• Knuckle Bandaid 40
• Bandaid  3/4" (100)
• First Aid Guide
• Antacid Tab 50 X 2
• Pain Relief Tab 50 X 2
• Cold Relief 50X2
• Ammonia Inhalants
• Antiseptic Swabs 10
• Butterfly Closures Med
• Non-Adhering Pads 2X3 10
• Paws Antimicrobial Wipes 10
• Gauze Roll Ns 2" Each
• Gauze Roll Ns 3" Each
• Gloves Vinyl Lge (2Pr)

• 6 antibiotic ointment
• 6-antiseptic towelettes
• 6-alcohol pads
• 6-hand sanitizer packets
• 3-sting x pads
• 20 plastic bandages
• 10-cloth bandages
• 4-xlarge bandages
• 4-knuckle bandages
• 4 fingertip bandages
• 6 gauze pads 2'' x 2''
• 6-gauze pads 3'' x 3''
• 6-gauze pads 4'' x 4''
• 2-oval eye pads 
• Electrolyte Tablets Packet
• Sunscreen Packet
• Lip Guard Packet
• Sting Relief Packet
• Diphen Tablet Packet
• Ivy Cleanse Towelette
• Bug X Towelettes
• Cool Jel Packet

More Custom Reorder Lists 

If you want to create your own custom reorder list, MFASCO Health & Safety offers some great refill tools including:

Make A First Aid Kit -  (create your own custom first aid kit online with this state of the art tool)

ReStockKit (a visual reorder list for industrial first aid kits)

First Aid Kit Refills (we offer complete refills for many of our first aid kits)

Reorder Lists - This is where all saved lists are stored.  You can create a custom Reorder List by adding individual items to a saved list you create.  You must be signed in to use this feature.

Refill This Kit (All of the first aid kits we make include a fast and easy to use reorder list)

MFASCO Health & Safety Tools Make First Aid Reorder Lists Fast and Simple

First Aid Products & Accessories
MFASCO's Make a Kit Tool
Complete First Aid Kit Refill Packs
Reorder Lists for First Aid Kits

Additional Resources for Reordering First Aid Kits & Supplies
How to Inspect First Aid Kits
Top 8 First Aid Kit Types
What is in a First Aid Kit?
Essential First Aid Kit Supply List

We're here to help

We're available to help you find the right supplies for your first aid kits. If you have questions or need assistance refilling your first aid kit, give us a call at 800-221-9222 or visit our website at www.mfasco.com to use our free first aid kit refill tools.

First Aid Kits & Accessories

• Complete First Aid Kits
• Make a Custom First Aid Kit
• First Aid Kit Refill Packs
• First Aid Supplies

Additional Resources for First Aid Kits

• Why is first aid important?
• What is a first aid kit used for?
• How to inspect your first aid kit for expiration dates

When looking at water recreation safety, there are a few common incidents to prepare for.

Drowning Swimming is fun, but it can also be dangerous. The CDC listed drowning as the fifth-leading cause of unintentional injury death in the U.S. About 10 people die from drowning every day, and of those 10, two will be age 14 or younger. All institutions offering pools or swimming activities should take these steps to limit the risk of drowning:

Barriers - Barriers are especially helpful in preventing drowning injury to very small children. If you have a home pool, you should have some sort of fencing that separates the pool from the rest of the yard. Hotels and schools that keep their pools in separate rooms should restrict access using locked doors and scheduled hours of use. If possible, cover the top of the pool when it is not in use.

Prohibit alcohol - Facilities, especially water parks and vacation resorts, should restrict use of alcohol by guests. Even small pools, like hot tubs, can be a drowning risk if the victim is inebriated.

Offer swim classes - If a school or camp offers swimming activities, it should also provide instructors and swim lessons to help reduce the risk of injury.

Trained staff - A facility should employ lifeguards for its water recreation features. Lifeguards should be accomplished swimmers who are trained in CPR and other life-saving strategies.

Emergency equipment- Your staff should be trained on how to deliver basic first aid. Every pool should have first aid kits and larger facilities should have a medical station. It is important for floatation devices, like U.S. Coast Guard approved life jackets, to be available. The CDC stated inflatable pool toys should not be treated as lifesaving devices.

Employing a lifeguard and providing the proper equipment are important safety practices.

The swimming pool has a number of hazards that can lead to minor injury. Slippery surfaces around the water edge and diving boards are two of the most common causes. Children might also scrape themselves against the walls or bottom of the pool.

The International Life Saving Federation found 45 percent of lifeguard first aid activity involved wound management. Bandages and gauze should be available, as well as disinfectants for open wounds. It is important to deal with bleeding quickly as to avoid infection.Twenty-five percent of injuries were treated with ICE (ice, compression and elevation). Ice packs are a necessity, especially in hot summer months.

Chemical accidents Pools use cleaning chemicals to prevent bodily fluids from these injuries, as well as other pollutants, from making the water unsafe. When deployed correctly, these chemicals kill germs, improve water quality, maintain equipment and prevent algae growth. Facilities should make use of chemical solutions but should be careful in doing so.

Eye wash stations should be available for any facility that uses powerful chemical cleaners.

People handling these chemicals should use the proper PPE to ensure their safety. Protective goggles and gloves should be common practice. Make use of respiratory masks, especially if chemicals are being handled in small spaces.

In the event of a spill, tend to it immediately. Close off the area if possible. Alarms and warning systems should be in place. Chemical showers and eyewash stations, or eyewash solution for mobility, should be available to staff and patrons.

• What has changed since the last standard in 2015?
• What first aid supplies are required by the ANSI 308.1-2021 standard?
• Do I need a Class A or Class B first aid kit for my workplace?
• How do I determine what Supplies I need for my workplace? 
• How many first aid kits do I need in my workplace?
• Can other types of first aid supplies be included other than just the ANSI Z308.1-2021 list?
• How Do I Know What Container Type I Need
• Selecting Additional Products for the Work Environment
• Ongoing Maintenance of First Aid Kits
• Guidance For Bleeding Control Kits In The Workplace
• How Do I know if my first aid kit is ANSI/OSHA approved?

What has changed since the last standard in 2015?

• The addition of a foil blanket
• Hand sanitizer quantity is increased from 6 to 10 packs

Changes for Class B first aid kits:

• Hand Sanitizer quantity increased from 10 packets to 20 packets
• The addition of a foil blanket
• A military-style tourniquet is now required in all class B first aid kits

What first aid supplies are required by the ANSI 308.1-2021 standard?

Class B Required Minimum Fill

Do I need a Class A or Class B first aid kit for my workplace?

Class A first aid kits are designed to provide a broad range of first aid products to deal with the most common types of injuries encountered in the workplace. These injuries include minor cuts and abrasions, minor burns, and eye injuries. Think of your workplace injuries that have occurred as well as the potential based on the work conditions. Also, consider how often supplies will be used.

Class B first aid kits contain a broader range and quantity of supplies to deal with injuries encountered in a more populated, complex, and or high-risk environment. Consider the types of injuries your workplace has experienced as well as the potential type of injuries that may happen broader range and quantity of supplies to deal with injuries encountered in a more populated, complex and /or high-risk workplace environment.

How do I determine what Supplies I need for my workplace?

1. What are the Hazards that exist?
2. What kinds of injuries have occurred or could occur in relation to these hazards?
3. What types of first aid supplies are needed to treat these injuries?

How many first aid kits do I need at my workplace?

Can other types of first aid supplies be included other than just the ANSI Z308.1-2021 list?

Selecting Additional Products for the Work Environment

• OTC Medicines
• Seasonal first aid supplies

How Do I Know What Container Type I Need?

• Portability (Type II, III, IV)
• Wall Mounted (Type I, III, IV)
• Water Resistant (Type III)
• Water Proof (Type IV)

Ongoing Maintenance of First Aid Kits

• Checking expiration dates
• Discarding any expired, damaged, or partially used supplies
• Organizing your supplies so they are easily identified and ready to use
• Restock all items missing or low in supply
• Disinfect and clean the cabinet/container surfaces and latches

MFASCO Health & Safety has an easy restock/refill feature for every workplace first aid kit we manufacture. Learn how to restock your first aid kit here. We use a simple 3 step approach to organize and reorder only the first aid supplies you need to stay in compliance. Always check ointments, liquids, and any other items that have expiration dates and don't forget to sanitize your first aid kit when you inspect your supplies.

Guidance For Bleeding Control Kits In The Workplace

• Chest Seal
• Compression Bandage
• Hemostatic Bandages
• Thermal Blanket
• Tourniquet

• Gloves
• Permanent Marker
• Shears

The MFASCO GCAT5 Bleeding Control Pack provides all of these supplies in a compact well marked, portable pack.

How do I know if my first aid kit is ANSI Z308.1-2021 approved?

We're here to help with your ANSI/OSHA first aid question.

We're available to help you find the right supplies for your first aid kits. If you have questions or need assistance refilling your first aid kit, give us a call at 800-221-9222

Certain environments may necessitate unique safety equipment, and signs can also help identify hard-to-spot classroom features. For example, while students should always wear protective goggles when working in a science lab, a chemistry classroom would benefit from an eye washing station. Have an eye wash symbol safety sign so even if you're not in the classroom, students and other staff members can safely direct the victim to the station. Safety and education go hand-in-hand, so make sure your classroom is equipped to handle common first aid emergencies.

MFASCO Health & Safety Provides Easy Access to The Right Classroom Safety Information and Products

School First Aid Kits & Accessories

Additional Resources for First Aid in Schools

• CPR Shield
• First Aid Cream
• Disposable Cold Pack
• Oval Eye Pad
• 4 oz Eye Wash
• Hand Sanitizer
• Gloves
• 2" Gauze Roll
• 4" Gauze Roll
• EMT Shears
• Splint
• Tourniquet
• Triangular
• 5 X 9 Surgical Pad
• Antiseptic Wipes
• 7/8" bandage Strips
• Triple Antibiotic Ointment
• 4 X 4 Burn Dressing

• See more details or purchase the ANSI Class B Update Pack here.
• See more information or purchase the complete ANSI Class B Refill here
• See more information or purchase the complete ANSI Class B Kit with box here.

Importance of Daycare First Aid Kits

How many First Aid Kits does a Daycare need?

What should be in a Daycare First Aid kit?

• Current standard first aid chart or first aid guide
• Telephone numbers of the poison control center, paramedics, and other emergency numbers
• Cold Packs
• Vinyl Gloves
• Digital Thermometer
• Antiseptic Wipes
• Adhesive Tape 1/2 x 2.5 yd
• Antibiotic Ointment
• 1 Gauze Roll 2 Inch
• 1 Gauze Roll 3 Inch
• Gauze Pads 2x2
• Junior Bandages
• Spot Bandages
• Fabric Bandage Strips
• Butterfly Closures
• Fingertip Bandages
• Patch Bandages
• Knuckle Bandages
• For each child Name
  • birth date, allergies or medical alerts, emergency phone numbers for parents, doctor, list of current medications

Portable First Aid Kit

• 3 Antibiotic Ointment
• 3 Antiseptic Wipes
• 10 Fabric Bandage Strips
• 2 Gauze Pads 3x3
• 1 Medilyte Electrolyte Packet
• 2 Non-Adhering pads
• 2 Hand Sanitizer Packets
• 1 Gauze Roll 2 Inch
• 1 Pair of Vinyl Gloves

First Aid Training and CPR

Let MFASCO Help Your Daycare Be Prepared

At a construction site 
If you're working construction or another job with tools, you're at risk for several types of burns. For example, a construction worker may sustain a heat burn by picking up a tool that was recently used by a co-worker and is still hot. Without the right PPE - in this case gloves - this could result in the worker burning his or her hands, which then may crack and blister. In such a situation, the first thing that should be assessed is the severity of the burn. If it is a minor burn, the National Institutes of Health recommend soaking the affected area under cool water for at least five minutes, then drying the burn and dressing it with a dry, sterile bandage. The NIH notes that ibuprofen may be used to reduce pain and swelling and that a burn lotion can be applied later to help heal the wound.

Electrical burns may also occur when working with wiring or power lines. Again, creating a safe work environment and wearing the proper safety clothing are of utmost importance. This type of burn is often severe, and whether or not a person feels OK after, he or she should see a doctor as soon as possible. According to the Mayo Clinic, electrical burns can cause internal tissue damage that requires immediate medical attention. The source advises using a sterile bandage to cover any burned areas until help arrives.

Lastly, sunburn is a type of radiation burn that can occur from overexposure. If you're working outside all day, wear appropriate clothes to shade your body and sunscreen.

Wear appropriate PPE to avoid burns at a work site.

As with other burns, use dry gauze or bandages to cover the burned area. If a chemical burn is severe, seek immediate medical attention.

While ice and frozen foods are often on hand in most kitchens, be wary of using these items to cool burns. The exposed area may have less feeling than normal due to the burn, which in turn will prevent you from recognizing that the cold object is causing frostbite. Instead, rinse the burnt area under cool water for several minutes and then cover with a dry bandage.

Wood and metal shop 
Bandage up the cut to prevent infection. As the grade level rises, so does the degree of classroom danger. As students get older, they are given more privileges and responsibilities. For example, many high school students get the chance to work with power tools in woods class and chemicals in science courses. If you are teaching a woods class this year, make sure all students understand proper safety procedures when working with sharp and powerful tools. Minor cuts are bound to happen, so have first aid supplies on hand to quickly stop the bleeding and prevent infection. However, with such dangerous equipment, there is also potential for more serious injuries that require medical attention. While students with minor cuts can be patched up and sent back to class, more serious wounds may need professional medical attention. Follow your school's protocol when these situations occur. In these types of classes, students should also wear safety goggles while working to prevent debris from irritating or cutting their eyes. Metals classes specifically should provide students with welding safety glasses to protect their eyes when welding, cutting and brazing. Have these supplies on hand rather than making students get them on their own. This way, you can ensure the kids can participate safely in class regardless of their own transportation issues or time constraints outside of the classroom.

MFASCO Health & Safety First Aid Supplies & Resources for Schools

School First Aid Product & Accessories:
First Aid Kits for School
School Emergency First Aid Bag 200 Pieces
School First Aid & Active Shooter Emergency Kit

Additional Resources for School First Aid:
4 Tips for School First Aid Guidelines & Procedures
Where should Schools Keep First Aid Supplies
Back to School First Aid, Health & Safety
What is Stop the Bleed

The Perfect size for a complete emergency response first aid bag 

This bag is small enough to be portable and carried anywhere. It is lightweight, bright and has many compartments to organize the supplies.  Best of all the bag is made of durable heavy nylon and the clasps and straps are top quality.  Measuring 7 1/2 x 10 1/2 x 7 inches the bag will fit nicely in the trunk of a car, under a desk or other small places close by so you can quickly respond to a first aid emergency.

Over 40 different types of supplies make this a truly complete emergency response first aid bag 

The list is long and complete. This kit contains all of the basic first aid supplies you would ever need to response to a medical emergency and provide first aid. 

• 10 Paws Wipes 
• 10 Non Adhering Pads 2x3 
• 4 Nextemp Disposable Thermometers 
• 2 Large Cold Pack 
• 2 Small Cold Pack 
• 2 Eye Wash 
• 1 Penlight 
• 2 Emergency Blankets 
• 1 16 oz Saline Solution 
• 1 Utility Scissors 
• 1 CPR Pocket Resuscitator 
• 1 Instant Glucose 
• 20 Splinter Outs 
• 6 Burn Gel 
• 1 Elastic Bandage 3 inch 
• 1 Cohesive Bandage 2 inch 
• 1 Triple Cut Adhesive Tape 
• 1 Blood Stopping Bandage 
• 2 Gauze Roll 2 inch 
• 2 Triangular Bandage 
• 1 First Aid Guide 
• 2 Gauze Roll 3 inch 
• 1 Multi Trauma Dressing 
• 1 Cloth Adhesive Tape 1 inch 
• 2 Surgical Dressings 5x9 
• 3 Finger Splints 3 Ammonia Inhalants 
• 2 Pair Vinyl Exam Gloves 
• 40 Plastic Bandaid Strips 
• 20 Cloth Bandaid Strips 
• 8 X-large Bandaids 
• 8 Knuckle Bandaids 
• 8 Fingertip Bandaids 
• 12 Gauze Pads 2x2 
• 12 Gauze Pads 3x3 
• 12 Gauze Pads 4x4 
• 4 Oval Eye Pads 
• 12 Triple Antibiotic Ointment 
• 12 Antiseptic Wipes 
• 12 Alcohol Pads 
• 12 Hand Sanitizer 
• 6 Sting Kill Wipes

Go to the complete emergency response first aid bag product and scroll down the page where you see the "Refill This Kit Now" tab.  Each of the items listed above can be ordered as needed when you are ready to refill supplies.  Small items are grouped together and organized in resealable bags for quick access and convenience.  This is a very well thought out emergency response bag.

Take a look at the video overview below:

What is a bloodborne pathogen?
A bloodborne pathogen is a microorganism that lives inside human blood, urine, feces, vomit, semen, vaginal secretions, saliva and others.  Examples of these pathogens are Hepatitus B, Hepatitus C and HIV, the virus that causes AIDS. Anyone exposed to these pathogens are at risk for serious or life-threatening illnesses.

How can i protect myself? 
Understanding what a bloodborne pathogen is and the risks involved is the first and most important step in protecting ourselves. Below are 7 ways we can reduce our exposure and limit our risks.

1.  Learn & Equip yourself - Take time to read about bloodborne pathogens from reliable sources like the CDC or OSHA.  Educate yourself and learn about the risks and what to do about it.  (Be trained if necessary).   

2.  Universal Precautions - Consider any bodily fluid potentially infectious. In the health care industry they call this Universal Precautions. Always assume and respond as if it is potentially infectious.

3.  Engineer out your exposure - limit your risk to exposure before it happens. An example would be to use an approved sharps container to collect used needles or other sharps that could cause a "stick" in an unsuspecting worker.

4.  Wear the appropriate PPE - Whenever you can reasonably anticipate exposure to bloodborne pathogens, always wear the necessary PPE. Examples would be gloves, gowns, masks, mouthpieces and resuscitation bags.

5.  Dispose of the potentially infectious PPE or other clothing properly - If clothes or PPE have been exposed to bodily fluids, be sure to remove them and dispose of them properly.

6.  Properly decontamination of the exposed area, surfaces - Bio Safety clean-up kits usually include bleach or other approved disinfectants that clean surfaces where exposure took place. The OSHA standard goes into detail of the proper process.

7.  Wash hands - As always, proper hand washing immediately after exposure is critical.

We live in an age where bloodborne pathogens are around us. Understanding what they are, how they are transmitted and how we can protect ourselves reduces the risk of exposure. See these links to learn more about Bloodborne Pathogens and the OSHA Bloodborne Pathogens Standard. The average American worker who is not part of the Health Care industry is not required by law to follow the standard BUT all of us should be informed and aware of the risks and understand how we should respond.

See the #4458 ANSI class B first aid supplies update pack here

Keeping your workplace first aid kit compliant doesn’t have to be confusing or time consuming. MFASCO Health & Safety has designed this handy ANSI Z380.1-2015 class b first aid supplies update pack to easily bring your first aid kit up to current regulatory standards.

We’ve carefully included all of the necessary supplies that received increased quantities or are brand new to the required ansi list. The update pack includes: 

• CPR Shield 
• First aid cream
• Oval eye pads 
• Hand sanitizer 
• 4 ounce eye wash 
• Gloves 
• 2” & 4 “inch gauze roll 
• Splint 5 X 9 surgical pads 
• EMT shears 
• Tourniquet 
• Antiseptic wipes 
• Triangular bandage 
• Disposable cold pack 
• 7/8” bandage strips 
• Triple antibiotic ointment 
• 4X4 burn dressing

All of these products can be found here on our website http://www.mfasco.com Click on the red button to see more details

If you have questions about the update pack or the ansi standard, contact us at our website via chat email or phone found on the yellow bar at the bottom of our website.

if you’re interested in refilling your first aid kit, take a look t the great first aid refill options to get you started.

Select a container

Gather your gauze & tape

Basic bandages

Antiseptics & Burns

Medicines

Miscellaneous Supplies 

Final Assembly

Accidents are never expected

Be sure to include the basics

The short list

Prepare for emergencies

Here is our suggested kit list:

1. Get the Flu vaccine
2. Take Precautions to prevent the spread
3. Take Doctor Prescribed Flu Antiviral Drugs

• Wash your hands often with soap and water or an alcohol-based hand rub.
• Avoid touching your eyes, nose, or mouth. Germs spread this way.
• Try to avoid close contact with sick people.
• Practice good health habits. Get plenty of sleep and exercise, manage your stress, drink plenty of fluids, and eat healthy food.
• Cover your nose and mouth with a tissue when you cough or sneeze. Throw the tissue in the trash after you use it.
• If you are sick with flu-like illness, stay home for at least 24 hours after your fever is gone without the use of fever-reducing medicine.

We have a variety of flu fighting and flu relief products that can help you during this aggressive flu season.  See our flu flighting products here.